Diamond-based Raman lasers set to revolutionize scientific applications
Washington: Scientists are trying to harness the unique properties of diamonds for development of new generation of lasers whose benefits range from better treatment of skin complaints and diabetes-related eye conditions to improved pollution monitoring and aeronautical engineering.
A University of Strathclyde team has developed a new type of high-performance, ultra-versatile Raman laser, that harnesses diamonds to produce light beams with more power and a wider range of colours than current Raman lasers.
These capabilities could open up important new applications. The research is funded by the Engineering and Physical Sciences Research Council (EPSRC).
Although researchers in Australia are also working on innovative diamond-based Raman laser technology, the Strathclyde team has achieved two major world firsts:
The first ever `tunable` diamond Raman lasers, where the colour of the light can be adjusted to meet specific needs (e.g. the treatment of vascular lesions** requires a yellow/orange light that is difficult to produce with conventional lasers but which is needed to maximise absorption by the lesion while minimising damage to surrounding tissue).
Underpinning this breakthrough is the fact that diamond`s optical properties enable diamond lasers to produce a range of colours that are hard to generate by conventional means. For example, yellow/orange light which can be used in medicine in the treatment of conditions such as vascular lesions or retinal bleeding of blood vessels at the back of the eyes.
This is important because lasers that can only provide short pulses of light are unsuited to some medical and other applications (e.g. where pulses would damage delicate structures in the eye). In medical treatment for highly sensitive areas therefore, there are situations where using a pulsed laser would create too much acoustic disturbance.
Professor Martin Dawson, who initiated and oversaw the project at the University of Strathclyde`s Institute of Photonics, said that the new lasers can generate light ranging from the lower end of the ultra-violet part of the electromagnetic spectrum, right through the visible part, up to the middle of the infra-red region, which means that they can plug many of the existing gaps in lasers` capabilities.
Dr Alan Kemp of the University of Strathclyde, who was Principal Investigator on the project, said that exploiting single-crystal diamonds directly in lasers opens up a world of possibilities.
Kemp explained that a key benefit is that you don`t need a big crystal to generate the power you require, so you can make lasers much smaller, asserting that a conventional Raman lasers have to incorporate a crystal 3-6 centimetres long.
He said that the new lasers can produce the same amount of power with a diamond crystal just 2-6 millimetres long, which means lasers could be deployed in confined spaces where they currently simply can`t go - such as in aeronautical applications and medicine where high-power lasers of particular colours are required but space is at a premium.
Dr Jennifer Hastie led the project to demonstrate the first tunable diamond Raman lasers, achieved by incorporating the Raman crystals into semiconductor disk lasers; a novel type of tunable laser extensively developed at the Institute of Photonics said that Raman lasers work by firing a pump light beam through a crystal, thus creating heat, and as that heat is generated the laser beam is converted to a different colour.
She added that if the initial colour of the pump light is tunable, for example that provided by a semiconductor disk laser, we can achieve tuning of the Raman laser colour.
- Parliament panel set to recommend Vijay Mallya's expulsion from Rajya Sabha
- Nirbhaya-like rape in Kerala: NHRC issues notice to state govt
- Delhi to observe mandatory summer vacation with effect from May 11
- Karnataka Chemistry paper leak: Alleged kingpin held
- Marine Salvatore Girone will be home 'in a few weeks', says Italian minister